TM 55-2835-208-23
2-56 ASSEMBLE FUEL CONTROL (Continued)
2-56
5.
Install nut (8) on elbow (7). Using As-
sembly Fluid No. 1 (E31), lubricate
packing (9). Install packing (9) on el-
bow (7) and install elbow on fuel pump
(2). Do not tighten elbow (7) until fuel
control installation (Task 2-57).
6.
7.
8.
Using Assembly Fluid No. 1 (E31), lu-
bricate packings (6) and (5). Install
packings (6) and (5) into packing
grooves of acceleration control unit (1).
and fuel pump (2). Secure with screws
(3) and washers (4).
Torque screws (3) to 25 inch-pounds.
Assemble acceleration control unit (1)
INSPECT
FOLLOW-ON MAINTENANCE:
Install Fuel Control (Task 2-57)
END OF TASK
2-108
Change 4