TM 55-2835-208-23
2-24 REMOVE START FUEL NOZZLE HOLDER ASSEMBLY
2-24
INITIAL SETUP
General Safety Instructions:
Applicable Configurations:
Turbine fuels are very flammable. They
cause drying and irritation of skin or eyes.
Handle only in well-ventilated areas away
from open flame.
Drain and store in
approved metal safety containers. Avoid
prolonged or repeated contact with skin, and
do not take internally. Wash contacted
areas of skin thoroughly after handling. If
irritation of skin results,
All
Tools:
Engine Repairmans Tool Kit
NSN 5180-00-323-4944
Eye Protection
Materials:
Lint-Free Cloth (E13)
Personnel Required:
68B Aircraft Powerplant Repairer
Equipment Condition:
APU in Assembly Fixture (Task 1-22)
get medical atten-
tion. Get medical attention for eyes.
1.
Place a cloth (E13) below connection to
absorb dripped fuel when disconnecting
tube assembly (1).
Handle tube assembly (1) care-
fully when disconnecting. Tube
assemblies are easily bent or
kinked.
2.
Remove lockwire (E16) from fuel nozzle
assembly (2) and discard (-100 APU
Only).
3. Disconnect tube assembly (1) from fuel
nozzle assembly (2).
GO TO NEXT PAGE
2-50
Change 4
