ARMY
TM 5-6115-612-34
MARINE CORPS TM 6115-34/8
AIR FORCE
TO 35C2-3-471-2
NAVY
AG-320B0-MME-000
12-3. SWIVEL CASTER ASSEMBLY. (cont)
c. Installation. (cont)
(6) Attach
assembled
swivel
caster to generator set with capscrews
(5), washers (6), and nuts (4). Torque
(3) Refer to
Detail
Assembly
to 450-500 inch pounds (50.8-56.5 Nm).
shown in Figure 12-2.
Ensure that
handle
extension
(16)
has
been
(7) PositIon wheel (3) in fork
installed on handle (12).
If not,
and install bolt (2) and nut (1).
remove
spring pin (18) from handle
(12).
Slide handle extension (16) into
(8) Raise
generator
set
place on handle (12) and secure with
remove blocks.
spring pin (17).
Reinstall spring pin
(18) in
hole provided in
handle
(9) Torque nut (1).
extension (16).
(10) Remove chocks and re
handbrake.
(4) Place collar (9) in swivel
head.
Slide fork (8) into swivel head.
(5) Secure collar to shaft of
fork with setscrew (7).
and
lease
12-5 (12-6 blank)
