ARMY
TM 5-6115-612-34
MARINE CORPS TM 6115-34/8
AIR FORCE
TO 35C2-3-471-2
NAVY
AG-320BO-MME-OOO
5-2.
GENERATOR ASSEMBLY MAINTENANCE.
(cont)
f.
Reassembly. (cont)
(39) Position bus bar (8) and
wiring on
positive output
connector
(35).
Secure with nut (28). Torque to
108-144 inch pounds (12.2-16.3 Nm).
Remove tags.
(40) Insert
screw
(27) in
mounting
hole between positive and
negative
connectors.
Place
tagged
wiring on screw and secure with washer
(26),
lockwasher (25), and nut (24).
Remove tags.
(41) Attach rear access
cover
(23) to left and right side panels with
washers (22) and screws (21).
(42) Place
tagged
wiring on
negative output connector.
(43) Place
inductor (20) into
position
with connector on
negative
output connector.
Secure with nut (15)
finger tight.
(44) Secure inductor to left and
right side panels with washers (18),
capscrews (19) lockwasher (17), and
nuts (16).
Torque to 27-33 inch pounds
(3.1-3.7 Nm).
(45) Torque nut (15) to 108-144
inch pounds
(12.2-16.3 Nm).
Remove
tags from wiring.
(46) Place assembled filter box
on generator and secure with washers
(11), lockwashers (10), and capscrews
(9).
Torque to 27-33 inch pounds
(3.1-3.7 Nm).
(47) Connect
bus
bar
(8) to
generator bus bar with washer (6), bolt
(7),
lockwasher (5), and nut (4).
Torque to
108-144
inch
pounds
(12.2-16.3
(48)
inductor
lockwasher
to 108-144
(49)
filter box
and screws
Nm).
Connect
stator
cable to
(20)
with
washer
(14),
(13), and bolt (12). Torque
inch pounds (12.2-16.3 Nm).
Place upper access cover on
and secure with washers (2)
(1).
g. Installation.
Install generator
in accordance with paragraph 2-6b.
5-18
