ARMY
TM 5-6115-612-12
MARINE CORPS TM 6115-12/7
AIR FORCE
T0 35C2-3-471-1
NAVY
AG-320B0-0MM-000
4-15.
BATTERY HOLDDOWN. (cont)
a.
Removal.
(3) Unhook and remove hook bolts
from battery support (8).
b. Repair.
Repair by straightening
bent hook bolts and
replacing
any
missing or defective attaching parts.
c.
Installation.
(1) Install
hook bolts (7) in
battery support (8).
CAUTION
Battery
holddown
needs to be
secure;
however,
excessive
pressure may cause
battery to
buckle, causing internal shorting.
(2) Install washers (6) on top of
hook bolts and secure firmly with wing-
nuts (5).
Do not overtighten.
(3) Stow power cable on cable
support assembly.
4-16.
ACCESS
DOORS. Maintenance of
access doors is limited to replace-
ment.
a.
co
ntrol Panel Access Door.
(1) Removal.
(a) Unlatch and open control
panel
access
door (1, figure 4-9).
Ensure that both support bars (2) are
locked.
(b) Remove
screws
(3)
and
clamping catch (4).
(c) Remove screws (5), nuts
(6), and washers (7) that secure
support bars to door.
(d) Remove screws
(9), and washers (10) that
to hinge (11). Remove door.
(e) Remove screws
(13), and lockwashers (14)
(8),
nuts
secure door
(12), nuts
that secure
operating instructions plate (15) and
wiring diagram plate (16) to door.
(2) Installation.
(a) Install operating instruc-
tions plate (15) and wiring diagram
plate
(16)
with
screws
(12),
lockwashers (14), and nuts (13).
(b) Secure door to hinge (11)
with screws (8),
lockwashers (10), and
nuts (9).
Torque to 32-35 inch pounds
(3.6-4 Nm).
(c) Aline support bars (2) with
door and
secure
with
screws
(5),
lockwashers (7), and nuts (6). (Torque
to 32-35 inch pounds (3.6-4 Nm).
(d) Install
clamping
catches
(4) and secure with screws (3).
Torque
to 32-35 inch pounds (3.6-4 Nm).
(e) Close control panel access
door.
b.
Exhaust Door.
(1) Removal.
Remove screws (17),
nuts (18),
and lockwashers (19) that
secure
exhaust door (20) to hinge
(21).
Remove screws (22), and washers
(23) to remove hinge.
4-51
