TM 1-2840-252-23-3
8-19
REMOVE FLOW PROGRAMMING VALVE (Continued)
8-19
NOTE
If oil cooler assembly has already been removed, do step 4.. If oil cooler assembly
has not been removed, omit step 4..
4. Remove three nuts (5), three bolts (6), three washers (7),flow programming valve (8). bracket (9), and
bracket (10).
5. Remove three nuts (5), three bolts (6), three washers (7), andflow programming valve (8).
FOLLOW-ON MAINTENANCE:
None
END OF TASK
8-55
