TM 1-2840-252-23-2
6-46
CLEAN FLOW DIVIDER AND BRACKET
6-46
INITIAL SETUP
Applicable Configurations
All
General Safety Instructions,
WARNING
Tools
Dry cleaning solvent (El9) is flammable
and toxic. It can irrtate skin and cause
i
burns. Use only in well-ventilated area
Materials
away from heat and open flame. In ase
c
Dry Cleaning Solvent (El9)
of contact, immediately flush skin or
Gloves (E24)
eyes with water for at least 5 minutes
1
.
Lint-Free Cloth (E30)
Get medical attention for eyes.
Personnel Required:
Equipment Condition:
Off Engine Task
1. Clean flow divider (1)as follows:
a. Wear gloves (E24) Clean flow divider using
dry cleaning solvent (El 9) and brush
b. Wipe dry Use lint-free cloth (E30)
2. Clean bracket (2)as follows
a. Use lint-free cloth (E30) dampened in dry
cleaning solvent (El9)
b. Wipe dry Use lint-free cloth (E30)
FOLLOW-ON MAINTENANCE
END OF TASK