TM 1-2840-252-23-2
6-48
INSTALL FLOW DIVIDER AND BRACKET (Continued)
6-48
1. Install bracket(1) and four bolts (2) Lockwire
bolts (2) Use lockwire (E33)
NOTE
If flow divider is a replacement,
do steps 2 thru 7 If same flow
divider that was removed is to
be installed, omit steps 2 thru 7
2. Remove two reducers (3) nd packings
a
(4) from removed flow divider(5) Use
vise with jaw caps
3. Remove reducer (6) and packing (7) from
removed flow divider (5).
4. Remove two nipples (8)and packings (9) from
removed flow divider (5).
6-149
GO TO NEXT PAGE
