TM 1-2840-252-23-2
6-37
INITIAL SETUP
In-Line Fuel Filter Assembly Removed (Task 6-35)
In-Line Fuel Filter Assembly Disassembled (Task
Applicable Configurations:
All
All
General Safety Instructions:
Tools:
WARNING
Powerplant Mechanic's Tool Kit,
Dry cleaning solvent (E19) is flammable
NSN 5180-00-323-4944
and toxic. It can irritate skin and cause
Materials:
burns Use only in well-ventilated area,
Dry Cleaning Solvent (El 9)
away from heat and open flame. In case
Gloves (E24)
of contact, immediately flush skin or
Lint-Free Cloth (E30)
eyes with water for at least 5 minutes
1
.
Personnel Required:
Get medical attention for eyes.
Aircraft Powerplant Repairer
Equipment Condition:
Off Engine Task
1. Wear gloves (E24) Clean filter bowl(1) Use dry
cleaning solvent (E19) and brush.
2. After cleaning, remove residuewith clean, lint-
free cloth (E30).
3. Clean filter head (2) and differential pressure
indicator (3)with lint-free cloth (E30) dampened
in dry cleaning solvent (E19).
4. After cleaning, remove residuewith clean, lint-
free cloth (E30).
FOLLOW-ON MAINTENANCE
Inspect In-Line Fuel Filter Assembly (Task 6-38)
END OF TASK
