TM 1-2840-252-23-2
6-36
INITIAL SETUP
General Safety Instructions:
WARNING
Applicable Configurations:
Turbine fuels are very flammable. They
All
may cause drying and irritation of skin
or eyes. Handle only in well-ventilated
Tools:
areas away from heat and open flam.e
Powerplant Mechanic's Tool Kit,
Drain and store in approved metal
NSN 5180-00-323-4944
safety containers. Avoid prolonged or
Deep Style Socket, 1-Inch
repeated contact with skin and do not
Vise
take internally. Wash contacted area of
Jaw Caps
skin thoroughly after handling. If
Strap Wrench
irritation of skin results, get medical
Materials:
attention. Get medical attention for
Wiping Rag (E64)
eyes.
Personnel Required:
Aircraft Powerplant Repairer
References:
Equipment Condition:
Off Engine Task
In-Line Fuel Filter Assembly Removed (Task 6-35)
NOTE
Before disassembling in-line fuel filter assembly, check for
evidence of fuel leakage between filter bowl and filter
head. If evidence of leakage is found, have an aircraft
powerplant inspector examine filter assembly in
accordance with Task 6-38.
Remove lockwire and unscrew filter bowl (1) from
1.
filter head (2) Use vise with Jaw caps and strap wrench
GO TO NEXT PAGE
