TM 1-2840-252-23-2
6-26
INITIAL SETUP
Materials:.
None
Applicable Configurations:
All
Personnel Required:
Aircraft Powerplant
Tools:
Technical Inspection Tool Kit
Equipment Condition:
NSN 5180-00-323-5114
Off Engine Task
1
Inspect start fue nozzle (1). There shall be no cracks
l
NOTE
Chafing on start fuel nozzle tip may indicate damage in
liner boss. Damage in liner boss can result in blocked or
restricted spray pattern.
2
Inspect start fuel nozzle air shroud ends2) as
(
follows:
a. There shall be no bent shroud ends.
b. There shall be no distorted or burned out
shroud ends.
c. There shall be no chafing in area 0 25 inch
from bottom of shroud ends.
3. Inspect start fuel nozzle internal ball (3) for
freedom of operation.
a. Shake start fuel nozzle (1) and listen for rattle.
b. There shall be no stuck ball.
4. Inspect start fuel nozzle tip 4). There shall be no
(
wear or distortion.
FOLLOW-ON MAINTENANCE
None
END OF TASK
