TM 1-2840-252-23-2
6-5. INSTALL HYDROMECHANICAL ASSEMBLY (HMA) (Continued)
6-5
NOTE
If hydromechanical assembly is a replacement, do steps 1
thru 9. If same hydromechanical assembly that was
removed is to be installed, omit steps 1 thru 9.
1. Remove tee (1), nipple (2), nd packing (3) from
a
removed hydromechanical assembly (4).
2. Remove nipple (5)and packing (6) from removed
hydromechanical assembly (4).
3. Remove nipple (7)and packing (8) from removed
hydromechanical assembly (4).
4. Remove reducer (9), nipple (10)and packings (11)
,
and (12) from removed hydromechanical assembly (4).
Use 1-1/8 inch flare, crowfoot attachment
GO TO NEXT PAGE
6-18