TM 1-2840-252-23-2
5-26
INITIAL SETUP
Personnel Required:
Aircraft Powerplant Inspector
Applicable Configurations:
References:
All
Task 1-109
Tools:
Equipment Condition:
Technical Inspection Tool Kit,
Off Engine Task
NSN 5180-00-323-5114
Materials:
Lint-Free Cloth (E30)
Lubricating Oil (E35 or E36)
1. Inspect gear assembly (1)
a. There shall be no cracked or chipped teeth.
b. There shall be no bends in shaft.
c. Pin (2) shall not be missing, broken, or loose.
d. Spline (3) shall not be worn deeper than 0.007 inch
(Ref Task 1-109).
e. There shall be no wear or scoring on machined area
(4) and journal (5) deeper than 0.009 inch.
GO TO NEXT PAGE
