TM 1-2840-252-23-2
5-26
INSPECT OVERSPEED DRIVE AND OUTLET COVER ASSEMBLY (Continued)
5-26
2. Inspect strainer (6).
b. There shall be no tears in wire mesh.
3. Inspect cover (7)for cracks. There shall be no cracks.
4. Inspect bearing (8).
a. There shall be no rust or broken parts
b. There shall be no pitting
c. There shall be no red-purple, purple or blue
discoloration
WARNING
Lubricating oils cause paralysis if
swallowed.
Prolonged contact with
them may irritate the skin. Handle only
in well-ventilated areas away from heat
and flame. Drain and store In approved
metal safety containers.
Avoid
prolonged or repeated contact with skin
and do not take internally.
Wash
contacted area of skin thoroughly after
handling. If Irritation of skin results,
get medical attention Get medical
attention for eyes.
5. Immerse bearing (8) in lubricating oils (E35 or E36) and
wrap in lint-free cloth (E30)
FOLLOW-ON MAINTENANCE
None
END OF TASK
5-82