TM 1-2840-252-23-2
5-11
INITIAL SETUP
Materials'
Crocus Cloth (E16)
Applicable Configurations
All
Personnel Required
:
Aircraft Powerplant Repairer
Tools:
Powerplant Mechanic's Tool Kit
Aircraft Powerplant Inspector
NSN 5180-00-323-4944
Equipment Condition
Technical Inspection Tool Kit,
Off Engine Task
NSN 5180-00-323-5114
Dry, Compressed Air Source
NOTE
This repair is allowed, provided it does not
cause pins to break or crack.
1. Straighten bent pins (1)of power turbine speed
pickup (2) Use long-nose pliers to gently move
pins (1) until they are straight
2. Remove corrosion from pins (1of power tur-
)
bine speed pickup (2) Polish pin, using in and out
motion over entire length of pin until corrosion is
removed Use crocus cloth (E1 6)
WARNING
When using compressed air for clean-
Ing, use approved protective equipment
for eyes and face. Do not use more than
30 psig air pressure. Do not direct air
towara yourself or another person. Fail-
ure to comply could result innjury to
i
eyes or skin. In case of Injury, get medi-
cal attention.
3. Wear goggles Remove loosened particles, using
clean, dry, compressed air
FOLLOW-ON MAINTENANCE
None
END OF TASK
