TM 1-2840-252-23-2
4-75 ASSEMBLE TAILPIPE ASSEMBLY (Continued)
4-75
Insert two long support rods (9) through aft holes of
5.
tailcone assembly (7) and centerbody (8).
Visually center support rods (9).
6.
Install two spring discs (10), with convex faces in
7.
contact, and spacer (11) on each end of support
rods (6 and 9).
8.
Coat threads of eight rod ends (6) and (9) with anti-
seize compound (E6).
Install one nut (12) on each end of support rods (6
9.
and 9).
Tighten finger tight maintaining equal
protrusion at both ends of support rods (6 and 9).
GO TO NEXT PAGE
4-428
