TM 1-2840-252-23-2
E
4-72
INITIAL SETUP
Equipment Condition:
Off Engine Task
Applicable Configurations:
All
Tailpipe Assembly Removed (Task 4-70)
Tailpipe Assembly Disassembled (Task 4-71)
Tools:
Powerplant Mechanic's Tool Kit,
General Safety Instructions:
WARNING
NSN 5180-00-323-4944
Goggles
Compressed Air Source
Dry cleaning solvent (E19) is flammable
and toxic. It can irritate skin and cause
Materials:
Dry Cleaning Solvent (El9)
burns. Use only in well- ventilated area,
Gloves (E24)
away from heat and open flame. In case
of contact, immediately flush skin or
Personnel Required:
Aircraft Powerplant Repairer
eyes with water for at least 15 minutes.
Get medical attention for eyes.
Wear gloves (E24). Clean tailcone assembly (1)
1.
and centerbody (2), using dry cleaning solvent (E19)
and brush
WARNING
When using compressed air for cleaning, use
approved protective equipment for eyes and
face. Do not use more than 30 psig air
pressure. Do not direct air toward yourself or
another person.
Failure to comply could
result in injury to eyes or skin. In case of
injury, get medical attention.
Wear goggles. Blow dry tailcone assembly (1) and
2.
centerbody (2)using clean, dry, compressed air.
FOLLOW-ON MAINTENANCE
Inspect Tailpipe Assembly (Task 4-73).
END OF TASK
