TM 1-2840-252-23-2
4-18
INITIAL SETUP
Materials:
None
Applicable Configurations:
Personnel Required:
All
Tools:
Equipment Condition:
Technical Inspection Tool Kit,
Off Engine Task
1. Inspect fireshield section (1).
a. There shall be no nicks or pits that result in holes.
b. There shall be no dents.
c. There shall be no bends or warpage which cause
deformation after installation.
d. Inspect bolt hole areas (2).
(1) There shall be no cracks (3) longer than 1/4
inch.
(2) There shall be no cracks wider than 1/32 inch.
(3) There shall be no converging cracks (4).
FOLLOW-ON MAINTENANCE
None
END OF TASK