TM 1-2840-252-23-2
4-2
INITIAL SETUP
Gloves (E24)
Lint-Free Cloth (E30)
Applicable Configurations:
All
Personnel Required:
Aircraft Powerplant Repairer
Tools:
None
Equipment Condition:
Off Engine Task
Materials:
Dry Cleaning Solvent (E19)
Thermocouple Jumper Lead Removed (Task 4-1)
WARNING
Dry cleaning solvent (E19) is flammable
and toxic. It can irritate skin and cause
burns. Use only in well-ventilated area,
away from heat and open flame. In case
of contact, immediately flush skin or
eyes with water for at least 5 minutes
1
.
Get medical attention for eyes.
Wear gloves (E24) and clean thermocouple
1.
jumper lead (1). Use lint-free cloth (E30) damp-
ened in dry cleaning solvent (E19)
FOLLOW-ON MAINTENANCE
Inspect Thermocouple Jumper Lead (Task 4-3).
END OF TASK
