TM 1-2840-252-23-2
2-45 CLEAN INLET HOUSING COVER ASSEMBLY (AVIM)
2-45
INITIAL SETUP
Output Shaft Seal and Housing Assembly Re-
moved (Task 2-39)
Applicable Configurations
.
Inlet Housing Cover Assembly Removed (Task
All
Tools
General Safety Instructions:
None
WARNING
Materials,
Dry cleaning solvent (E19) is flammable
Dry Cleaning Solvent (El 7)
and toxic. It can irritate skin and cause
Gloves (E24)
burns. Use only in well-ventilated area,
Dry, Lint-Free Cloth (E30)
away from heat and open flame. In case
Personnel Required:
of contact, immediately flush skin or
Aircraft Powerplant Repairer
eyes with water for at least 5 minutes
1
Equipment Condition:
Get medical attention for eyes.
Off Engine Task
Engine Oil System Drained (Task 1-69)
1. Wear gloves (E24) Clean inlet housing cover
assembly (1). Use lint-free cloth (E30) damp-
ened in dry cleaning solvent (El 7)
2. Wipe dry using clean, dry, lint-free cloth (E30)
FOLLOW-ON MAINTENANCE
Inspect Inlet Housing Cover Assembly (Task 2-46)
END OF TASK
2-348
