6-33 REPAIR MAIN FUEL FILTER
AND BRACKET (TEN BOLT HOLES)
Off Engine Task
Powerplant Mechanic's Tool Kit,
Technical Inspection Tool Kit,
1. Straighten bends or distortion in area of
bolt holes (1) in bracket (2).
This repair is allowed as long as it does not
generate cracks beyond the following limits:
a. There shall be no more than one edge-to-bolt
hole crack (3) per each bolt hole (1).
b. At bolt holes with edge-to-bolt hole crack
(3), there shall be no more than one
additional crack (4). Crack (4) shall be no
more than 1/16 inch long.
c. There shall be no converging cracks (5) that
might cause material to fall out.
END OF TASK