Technical Inspection Tool Kit,
Off Engine Task
1. Inspect fuel control housing (1). There shall be
no cracks. There shalI be no evidence of leakage.
a. Inspect filter cavity (2). There shall be no
nicks, dents or scratches deeper than 0.010
inch on three packing sealing surfaces (3).
b. Inspect splines (4 and 5). (Ref. Task 1-118).
There shalI be no wear deeper than 0.007 inch
on splines (4 and 5).
c. Inspect levers (6 and 7). They shall not be
missing, broken or loose.
d. Inspect fuel selector (8). Make sure JP4 index
line (9) is aligned with index point (10).
GO TO NEXT PAGE