REPAIR FUEL CONTROL
Position packing retainer (4), seal ring (8)
and related parts on shouldered shaft (1) or
(2) so that the face of the seal ring engages
the polished surface of the shaft sealing
flange. Hold parts in engagement and
insert shouldered shaft (1) or (2) so that the
splines engage the internal splines in the
Use care when installing the retaining ring.
The seal retainer is spring loaded, exerting
approximately 4.5 pounds of force.
Using retaining ring pliers install the
retaining ring (3) into housing (12) with
sharp edge facing out.
END OF TASK
Change 6 18.3/(6-18.4 blank)