TM 55-2840-254-23
8-77
INITIAL SETUP
Equipment Condition:
Off Engine Task
No. 2 Bearing Pressure Oil Strainer Removed
Applicable Configurations:
All
Tools:
General Safety Instructions:
Powerplant Mechanic's Tool Kit,
NSN 5180-00-323-4944
Compressed Air Source
Goggles
Dry cleaning solvent (E17) is flammable
Materials:
Dry Cleaning Solvent (E17)
and toxic. It can irritate skin and cause
Gloves (E20)
burns. Use only in well-ventilated area,
away from heat and open flame. In case
Personnel Required:
of contact, immediately flush skin or
68B10 Aircraft Powerplant Repairer
eyes with water for at least 15 minutes.
Get medical attention for eyes.
1. Wear gloves (E20). Clean strainer (1), using brush
and dry cleaning solvent (E17).
When using compressed air for cleaning,
use approved protective equipment for
eyes and face. Do not use more than
30 psig air pressure. Do not direct air
toward yourself or another person.
Failure to comply could result in in-
jury to eyes or skin. In case of injury,
get medical attention.
2. Wear goggles. Blow dry strainer (1), using clean,
dry compresed air.
FOLLOW-ON MAINTENANCE:
Inspect No. 2 Bearing Pressure Oil Strainer
END OF TASK
