TM 55-2840-254-23
8-7
INITIAL SETUP
General Safety Instructions:
Applicable Configurations:
All
Tools:
Powerplant Mechanic's Tool Kit,
Dry cleaning solvent (E17) is flammable
NSN 5180-00-323-4944
and toxic. It can irritate skin and cause
burns. Use only in well-ventilated area,
away from heat and open flame. In case
Materials:
Dry Cleaning Solvent (E17)
of contact, immediately flush skin or
Gloves (E20)
eyes with water for at least 15 minutes.
Get medical attention for eyes.
Personnel Required:
68B10 Aircraft Powerplant Repairer
Equipmnt Condition:
Off Engine Task
Oil Cooler Assembly Removed (Task 8-5)
Oil Cooler Assembly Disassembled (Task 8-6)
1. Wear gloves (E20). Flush internal passages of
oil cooler (1) with dry cleaning solvent (E17).
2. Clean external surfaces of oil cooler (1). Use
dry cleaning solvent (E17) and brush.
3. Allow to drain and air-dry.
GO TO NEXT PAGE
