TM 55-2840-254-23
6-45
6-45 INSTALL FLOW DIVIDER AND BRACKET (Continued)
1. Install bracket (1) and four bolts (2). Lockwire
bolts (2). Use Iockwire (E29).
NOTE
If flow divider is a replacement, do steps
2. thru 5. If same flow divider that was
removed is to be installed, omit steps 2.
thru 5.
2. Remove two reducers (3) and packings (4) from
removed flow divider (5). Use vise with jaw caps.
GO TO NEXT PAGE
6-166
