TM 55-2840-254-23
6-37
INITIAL SETUP
Equipment Condition:
Off Engine Task
In-Line Fuel Filter Assembly Removed
Applicable Configurations:
All
Tools:
General Safety Instructions:
Powerplant Mechanic's Tool Kit,
NSN 5180-00-323-4944
Deep Style Socket, 1 -Inch
Vise
Jaw Caps
Turbine fuels are very flammable. They
Strap Wrench
may cause drying and irritation of skin
or eyes. Handle only in well-ventilated
Materials:
areas away from heat and open flame.
Wiping Rag (E58)
Drain and store in approved metal safety
containers. Avoid prolonged or repeated
contact with skin and do not take in-
Personnel Required:
ternally. Wash contacted areas of skin
68B10 Aircraft Powerplant Repairer
thoroughly after handling. If irritation
of skin-results, get medical attention.
References:
Get medical attention for eyes.
NOTE
Before disassembling in-line fuel filter
assembly, check for evidence of fuel
leakage between filter bowl and filter
head. If evidence of leakage is found,
have an aircraft powerplant inspector
examine filter assembly in accordance
with Task 6-39.
1. Remove Iockwire and unscrew filter bowl (1)
from filter head (2). Use vise with jaw caps and
strap wrench.
GO TO NEXT PAGE
