TM 55-2840-254-23
6-32
6-32 INSPECT MAIN FUEL FILTER AND BRACKET (Continued)
b. Using machinist's steel rule (14), push pop-
pet (12) into housing (13). Poppet (12)
should snap back into housing (13) smooth-
ly with light pressure applied:
c. Inspect housing (15). There shalI be no cracks.
d. Inspect bracket (16). There shalI be no loose-
ness. If looseness exists, proceed as follows:
(1)
Remove Iockwire.
Tighten bolts (17).
(2)
Lockwire bolts (17). use lockwire (E29).
(3)
NOTE
New type filter has plug installed in ele-
ment.
7. Inspect filter element (18). There shall be no
contamination. If contamination is found, in-
spect contaminated fuel system (Ref. Task
1-85).
FOLLOW-ON MAINTENANCE:
None
END OF TASK
6-131
