TM 55-2840-254-23
6-32 INSPECT MAIN FUEL FILTER AND BRACKET (Continued)
6-32
5.1 Inspect bracket (5.1).
a. There shall be no corrosion or pitting.
b. There shall be no bends or distortion in area
around eight bolt holes (6).
5.2 Inspect bracket (5.1). There shall be no cracks
beyond the following limits:
a. There shall be no more than one
edge-to-bolt hole crack (7) per each bolt
hole (6).
b. At bolt holes with edge-to-bolt hole crack
(7), there shall be no more than one
additional crack (8), Crack (8) shall be no
more than 1/16 inch long.
c. There shall be no converging cracks (9)
that might cause material to fall out.
GO TO NEXT PAGE
Change 1
6-130
