TM 55-2840-254-23
6-22
INITIAL SETUP
General Safety Instructions:
Applicable Configurations:
All
Dry cleaning solvent (E17) is flammable
Tools:
Goggles
and toxic. It can irritate skin and cause
Compressed Air Source
burns. Use only in well-ventilated area,
away from heat and open flame. In case
Materials:
of contact, immediately flush skin or
Dry Cleaning Solvent (E17)
eyes with water for at least 15 minutes,
Gloves (E20)
Get medical attention for eyes.
Lint-Free Cloth (E26)
Personnel Required:
68610 Aircraft Powerplant Repairer
Equipment Condition:
Off Engine Task
Primer Tube Assembly Removed (Task 6-21)
1. Clean primer tube assembly (1) as follows:
a. Wear gloves (E20). Immerse primer tube as-
sembly (1) in dry cleaning solvent (E17) and
agitate.
b. Wipe dry. Use lint-free cloth (E26).
GO TO NEXT PAGE
