1-110 ADJUST OIL PUMP (Continued)
1-110
8. If oil pump pressure et the filter drain is within
limits and pressure at the No. 2 bearing con-
nection is less than the limits outlined in step
9. When the adjustment is properly reached be-
tween 100 to 130 psig, tighten locknut (12).
Lockwire locknut (12) using Iockwire (E29).
10. Remove pressure gage tube assembly (Appendix
E) (8), union (10) and packing (7).
GO TO NEXT PAGE
1-548
