TM 55-2840-254-23
1-88 CHECK FOR SEAL LEAKAGE (NO. 4 AND 5 BEARING) AVIM) (Continued)
1-88
In following step, hold No. 4 and 5 bear-
ing scavenge adapter using open-end
wrench (T53). Failure to use wrench may
result in damage and dislocation of oil
transfer tube resulting in oil leaks.
h. Place open-end wrench (T53) (7) on No. 4
and 5 bearing scavenge adapter (8).
i. Remove pressure cap (11) from reducer (10).
In following step, hold No. 4 and 5 bear-
ing scavenge adapter using open-end
wrench (T53), Failure to use wrench may
result in damage and dislocation of oil
transfer tube resulting in oil leaks.
j. Place open-end wrench (T53) (7) on No. 4
and 5 bearing scavenge adapter (8).
k. Connect tube assembly (9) to reducer (10).
GO TO NEXT PAGE
1-296
