TM 55-2840-254-23
1-85.1 INSPECT ENGINE SERVICEABILITY
General Safety Instructions:
INITIAL SETUP
Applicable Configurations:
To be performed following an AOAP
Lubricating oils (E32 and E33)
recommendation of serviceability
cause paralysis if swallowed.
Prolonged contact with them
Tools:
may irritate the skin. Handle
Powerplant Mechanic's Tool Kit,
only in well-ventilated areas
away from heat and flame. Drain
Technical Inspection Tool Kit,
and store in approved metal
NSN 5180-00323-5114
safety containers. Avoid pro-
Oil Sample Bottle
longed or repeated contact with
Approved Metal Safety Container
skin and do not take internally.
Compressed Air Source
Wash contacted areas of skin
Goggles
thoroughly after handling. If
Utility Pail
irritation of skin results, get
medical attention. Get medical
Materials:
attention for eyes.
Dry Cleaning Solvent (E17)
Gloves (E20)
Lint-Free Cloth (E26)
Lockwire (E29)
Dry cleaning solvent (E17) is
Wiping Rag (E58)
flammable and toxic. It can
irritate skin and cause burns.
Parts:
Use only in well-ventilated
Packings
area, away from heat and flame.
In case of contact, immediately
Personnel Required:
flush skin or eyes with water
for at least 15 minutes. Get
medical attention for eyes.
GO TO NEXT PAGE