TM 55-2840-254-23
1-26
1-26 REMOVE ENGINE FROM SHIPPING AND STORAGE CONTAINER (Continued)
44. If leak exists at valve stem (9), replace valve
stem (9) as follows:
Use care during removal of valve stem.
Injury to personnel can result. If injury
occurs, get medical attention.
a. Remove valve stem (9) from valve (8). Use
slotted end of valve cap (7).
b. Install serviceable valve stem (9) in valve (8).
Use slotted end of valve cap (7).
45. If leaks exist at valve (8) tighten valve (8). If
valve still leaks, replace valve (8) as follows:
Use care during removal of valve. Injury
to personnel can result. If injury occurs,
get medical attention.
a. Remove valve (8).
b. Install serviceable valve (8).
NOTE
Following step only applies if valve
stem or valve were replaced. If valve
or valve stem were not replaced, omit
step 46.
46. Apply 5 psig air pressure to valve (8). Use clean,
dry compressed air.
GO TO NEXT PAGE
1-84
