TM 55-2835-209-23
4-12 REMOVE FUEL CONTROL ASSEMBLY (CONT)
1.
2.
3.
4.
5.
6.
7.
8.
9.
To prevent clogging or contam-
ination, all exposed openings
in fuel, oil, air lines and
electrical connectors will be
capped immediately. Be sure
caps and plugs are clean.
Remove fuel control assembly upper
cover (Task 4-1).
Put machinery towel (D20) under fuel
control assembly prior to discon-
necting tubes.
Disconnect fuel solenoid valve elec-
trical connector (1).
Disconnect fuel control assembly
electrical connector (2).
Disconnect and remove fuel control
assembly to fuel solenoid valve tube
(3).
Disconnect and remove fuel inlet
tube assembly (4) from fuel control
assembly and fuel control lower
cover union.
Loosen coupling (5).
Pull forward on fuel control assem-
bly (6) to disengage splined shaft
and coupler, then remove fuel con-
trol assembly.
Remove and discard packing (7).
10.
Clean fuel control assembly using
process 1, Chapter 8.
FOLLOW-ON MAINTENANCE: None.
Change 1
4-35
