TM 55-2835-208-23
2-106
INSTALL ACCESSORY DRIVE ASSEMBLY (Continued)
2-106
2.
Using Assembly Fluid No. 1 (E31), lubri-
cate and install packing (13) in groove of
reduction drive assembly (8).
Note
Two accessory drive assembly at-
taching bolts are installed during
installation of harness assembly
(Task 2-82).
3.
Install accessory drive assembly (7) using
washers (12), (11) and bolts (10) and
(9). Tighten bolts in criss-cross pattern
and torque to 60 inch-pounds.
4.
Install gasket (18) and cover (5) using
screws (6). Install gasket (17). lnstall
ignition exciter (2) with cover (1) at-
tached, using bolts (3) and washers (4).
Torque bolts to 40-60 inch-pounds.
INSPECT
FOLLOW-ON MAINTENANCE:
Install electrical assembly (Task 2-82)
Install base assembly (Task 2-70)
END OF TASK
Change 4 2-193
