TM 55-2835-208-23
2-100.2 CLEAN AND INSPECT OIL FILLER TUBE AND DIPSTICK ASSEMBLY 2-100.2
INITIAL SETUP
Materials:
Applicable Configurations:
Lint-Free Cloth (E13)
Dry Cleaning Solvent (E20)
APU 116305-300
APU 116305-302
Personnel Required:
Tools:
68B Aircraft Powerplant Repairer
68B Powerplant Inspector
Engine Repairman’s Tool Kit
NSN 5180-00-323-4944
Rubber Gloves
Equipment Conditions:
NSN 8415-00-266-8677
Container
Off APU Task
Eye Protection
1.
2.
3.
4.
Dry cleaning solvent (E20) is
flammable and toxic. It can irr-
itate skin and cause bums. Use
only in well-ventilated area, away
from heat and open flame. Wear
gloves and eye protection. In
case of contact, immediately flush
eyes or skin with water for at least
for ~
Wearing gloves and eye protection, GJQFUL
with lint-
free cloth (E 13) dampened with solvent
(E20) .
with sol-
vent (E20). Allow to air dry.
~ with lint-free cloth
(E13) dampened with solvent (E20)
Wipe dry with clean lint-free cloth
(E13).
GO TO NEXT PAGE
Change 5
2-182.1
