TM 55-2835-208-23
2-93 CLEAN AND INSPECT OIL SIGHT GAGE
2-93
INITIAL SETUP
Materials Required:
Applicable Configurations:
Dry-Cleaning Solvent (E20)
Lint-Free Cloth (E13)
A ll
Personnel Required:
Tools:
68B Aircraft Powerplant Repairer
Engine Repairman’s Tool Kit
68B Powerplant Inspector
NSN 5180-00-323-4944
Rubber Gloves
Equipment Condition:
NSN 8415-00-266-8677
Container
Off APU Task
Eye Protection
1.
2.
3.
Dry-cleaning solvent (E20)
is flammable and toxic.
It can irritate skin and
cause burns.
Use only in
well-ventilated area, away
from heat and open flame.
Wear gloves and eye pro-
tection.
In case of
contact, immediately flush
eyes or skin with water for
at least 15 minutes.
Get
medical attention for eyes.
Wearing gloves, wipe oil sight
gage with clean cloth
(E13)
dampened
with
dry-cleaning
solvent (E20).
Allow to drain dry, then wipe
clean
with
dry
clean
cloth
(E13).
Inspect oil sight gage bod y (1)
for cracks, dents or gouges.
If damaged, discard assembly.
GO TO NEXT PAGE
2-170
