TM 55-2835-208-23
2-39 INSTALL TEE FITTING BRACKET ASSEMBLY
2-39
INITIAL SETUP
Applicable Configuration:
All except APU 116305-100
Tools:
Engine Repairman’s Tool Kit
NSN 5180-00-323-4944
Torque Wrench
NSN 5120-00-542-4489
Materials:
Lockwire (E16)
Personnel Required:
68B Aircraft Powerplant Repairer
68B Powerplant Inspector
Equipment Condition:
APU in Assembly Fixture (Task 1-22)
1.
2.
3.
4.
5.
6.
FOL
Install restrictor (9) if removed.
Install eye-bolt (5) and jam nut (4) in
tee fitting bracket assembly (6).
Screw in eye-bolt (5) until it bottoms out
and back out until aligned as shown.
Torque jam nut (4) to 135 inch-pounds.
Safety wire jam nut (4) with lockwire
(E16).
(2). Torque B-nuts (7) to 60 inch-
pounds, and B-nut (8) to 80 inch-
LOW-ON MAINTENANCE:
Connect tube assemblies (3), (1) and
pounds.
Leak Check During Operation
END OF TASK
Change 5
2-76
