ARMY TM5-6115–612-12
NAVY AG–320B0-0MM-000
4-73.
INDICATOR LAMPS. (cont)
Figure 4-45.
Indicator Lamp Test
b. Removal. (cont)
(5) Unscrew
a n d
remove
lamp
housing (16) and lamp (17).
(6) Remove nut (18). This allows
removal of indicator light socket from
back of panel.
(7) Remove
n ut
(19)
from
indicator light socket (20).
c.
Installation.
(1) Screw nut (19) onto indicator
light socket (20).
(2) From back of panel, insert
n ew
indicator
light
socket into
mounting hole.
(3) On front of panel, secure
socket with nut (18).
Tighten nut
until socket is securely mounted.
(4) Install lamp (17) and lamp
housing (16).
(5) Remove
tags
and
connect
wiring to terminals on back of socket.
(6) Close
control
panel
and
secure with turnlock fasteners.
Retest
lights and adjust dimmers.
(7) Close control panel access
door.
(8) Connect battery cable plug
connector to battery.
4-137
