A R M Y
TM 5-6115-612-12
MARINE CORPS TM 6115-12/7
AIR FORCE
T0 35C2-3-471-1
NAVY
AG-320B0-0MM-000
4-41.
ELECTRICAL HIGH PRESSURE FUEL
PUMP.
(cont)
a.
Removal. (cont)
(3) Tag and disconnect fuel pump
electrical connector.
(4) Tag and disconnect fuel pump
inlet (1, figure 4-29) and outlet fuel
lines (2).
(5) Remove self-locking nuts (3),
washers (4),
and capscrews
(5) that
secure
fuel pump (7), in mounting
brackets (6).
(6) Remove pump (7).
b. Insta llation.
(1) Install fuel pump (7) in
mounting brackets (6) and secure with
capscrews
(5),
washers
(4),
and
self-locking nuts (3). Torque to 40-60
Inch pounds (4.5-6.8 Nm).
(2) Remove
tags
and
connect
outlet (2) and inlet (1) fuel lines to
pump.
(3) Remove tag and connect pump
electrical connector.
(4) Close fuel housing (paragraph
4-34C).
4-42. SOLENOID
of the solenoid
replacement.
VALVE. Maintenance
valve is limited to
a.
Removal.
(1) Gain access to fuel housing
(paragraph 4-34a).
(2) Tag and disconnect solenoid
valve electrical connector.
4-98
(3) Tag
and
disconnect
valve
inlet (2, figure 4-29) drain (8), and
outlet (9) lines from solenoid valve
(13).
(4) Remove
screws
(10),
lockwashers (11), washers (12) and
solenoid
valve
(13)
from
mounting
bracket (14).
b. Installation.
(1) Install solenoid valve (13)
on mounting bracket (14) and secure
with washers (12), lockwashers (11),
and screws (10).
Torque to 10-20 inch
pounds (1-2.3 Nm).
(2) Remove
tags
and
connect
solenoid valve inlet (2), drain (8),
and outlet (9) lines.
(3) Remove
tag
and
connect
electrical connector to solenoid valve.
(4) Close fuel housing (paragraph
4-34C).
4-43. FUEL
INJECTION
NOZZLES.
Maintenance of
the
fuel
injection
nozzles is
limited to
inspection,
servicing, and replacement.
a.
Removal.
WARNING
To prevent injury, ensure that
battery cable plug connector is
disconnected from battery before
performing maintenance.
(1) Disconnect battery cable plug
connector from battery.
