TM 5-6115-590-12
Figure 2-17(2). Operation to Deliver Ventilating Air. (Sheet 2 of 2) (TS 6115-590-12/2-172)
moisture on instruments and controls. Remove
excess moisture from instrument and control
panels with a clean, dry cloth.
d. When power plant is not operating, cover unit
with a tarpaulin or other protective covering to
prevent entry of moisture.
2-19. Operation in Salt Water Areas
a. During periods when power plant is not
operating, wash down exterior of power unit
regularly with fresh water. Avoid directing a water
hose or other high pressure water source at
openings into interior of power plant. Wash down
fins on condensers and evaporators from inside to
the outside. Wipe down internal components with
an approved cleaning solvent.
b. Carefully inspect components for evidence of
corrosion and deterioration of insulation. Inspect all
painted surfaces for cracked, peeled, or blistered
paint. Coat all exposed surfaces with an approved
2-26
