TM 5-6115-590-12
Figure 2-15(2). Operation to Deliver Cooled Air (Sheet 2 of 3). (TS 6115-590-12/2-152)
remote operation of ventilating air system is
required connect power plants as follows:
(1) Connect 400 Hz auxiliary power cable
assembly (fig. 1-15 sheet 2 of 7) to remote fan
power input receptacle (fig. 2-9) of nonoperating
unit. Connect other end of cable assembly to
remote fan power output connector (fig. 2-9) on
operating unit.
(2) Place vent system select switch (fig.
2-4) on nonoperating unit in desired system position
to operate system No. 1, system No. 2, or systems
1 and 2 together.
(3) Place conditioned air mode select switch
(fig. 2-4) on nonoperating unit in OFF position.
2-20
