TM 1-2840-252-23-3
G-69
ENGINE OUT INDICATOR (EOI) IS ALWAYS ILLUMINATED EXPANDED INSTRUCTIONS
Refer to numbered steps in figure 155.
Step 2.
Check harness connector PL1 (figure 201) at DECU for tight connection.
Step 3.
Disconnect connector PL1 to check pins and sockets.
Step 4.
With PL1 and PL3 disconnected, turn on power to caution panel.
Step 5.
Before tightening harness connector PL1, be sure that keyway in harness connector is aligned
with keyway in component connector.
Step 9.
Refer to manufacturer's procedure for diagnosing and replacing harness.
Step 12.
Refer to manufacturer's procedure for diagnosing and replacing harness or caution panel.
G-164
