TM 1-2840-252-23-3
8-128
INSTALL OIL LEVEL FLOAT ASSEMBLY (AVIM) (Continued)
8-128
6. Adjust oil level indicator (Ref. Task 8-121, steps 3 thru 7).
7. Install two spacers (15), cover (16), two washers (17), and two bolts (18). Torque bolts (18) to 15 inch-pounds.
Lockwire bolts (18). Use lockwire (E33).
INSPECT
FOLLOW-ON MAINTENANCE:
Install Inlet Housing Cover Assembly (Task 2-48).
Install Output Shaft Seal and Housing Assembly (Task 2-43).
Service Engine Oil System (Task 1-68).
END OF TASK
8-322
