TM 1-2840-252-23-3
8-124
CLEAN OIL LEVEL FLOAT ASSEMBLY (AVIM)
8-124
INITIAL SETUP
Inlet Housing Cover Assembly Removed (Task
2-44)
Applicable Configurations:
Oil Level Float Assembly Removed (Task 8-122)
All
Oil Level Float Assembly Disassembled (Task
Tools:
8-123)
General Safety Instructions:
Materials:
WARNING
Dry Cleaning Solvent (E19)
Dry cleaning solvent (E19) is flammable and toxic. It
Gloves (E24)
can Irritate skin and cause burns. Use only in well-
Lint-Free Cloth (E64)
ventilated area, away from heat and open flame. In
Personnel Required:
case of contact, immediately flush skin or eyes with
water for at least 15 minutes. Get medical attention
Equipment Condition:
for eyes.
Off Engine Task
Engine Oil System Drained (Task 1-69)
Output Shaft Seal and Housing Assembly Re-
moved (Task 2-39)
1. Wear gloves (E24) and clean float (1). Use dry cleaning solvent (E19) and brush.
2. Wipe dry using lint-free cloth (E64).
3. Clean shaft (2). Use dry cleaning solvent (E19) and brush.
4. Wipe dry using lint-free cloth (E64).
FOLLOW-ON MAINTENANCE:
Inspect Oil Level Float Assembly (Task 8-125).
END OF TASK
8-313