TM 1-2840-252-23-3
8-112
TEST CHIP DETECTOR
8-112
INITIAL SETUP
Materials:
Applicable Configurations:
None
All
Personnel Required:
Tools:
Aircraft Powerplant Repairer
Multimeter
Equipment Condition:
Off Engine Task
1. Measure insulation resistance of chip detector (1) as follows: Use multimeter.
a. Set multimeter range switch to R X 1000.
b. Touch red probe (2) to pin A (3).
c. touch black probe (4) to pin B (5).
d. Meter shall indicate 10.000 ohms minimum.
FOLLOW-ON MAINTENANCE:
None
END OF TASK
8-279
