TM 1-2840-252-23-3
8-104
INSTALL NO. 4 AND 5 BEARING FILTER (Continued)
8-104
WARNING
In following step, wear goggles when installing spring. Spring may fly apart
when installing. Failure to comply may cause serious eye injury. If eye injury
occurs, get medical attention.
CAUTION
In following step, be sure that filter is installed in reducer with small diameter
hole facing up. Failure to comply will cause less oil flow to bearings and
result in bearing failure.
4.
Wear goggles. Install No. 4 and 5 bearing filter (7) and spring (8 ) in reducer (1).
CAUTION
In following step, hold No. 4 and 5 bearing lube adapter using open-end
wrench (T24). Failure to use wrench may result in damage and mislocation
of oil transfer tube resulting in oil leaks.
5.
Place open-end wrench (T24) (6) on adapter (2).
6.
Install hose assembly (9) on reducer (1).
INSPECT
FOLLOW-ON MAINTENANCE:
None
END OF TASK
8-265/(8-266 blank)
