TM 1-2840-252-23-3
8-36
INSPECT OIL FILTER COVER ASSEMBLY AND OIL FILTER ELEMENT
8-36
INITIAL SETUP
Materials:
Applicable Configurations:
None
All
Personnel Required:
Tools:
Aircraft Powerplant Inspector
Technical Inspection Tool Kit,
Equipment Condition:
NSN 5180-00-323-5114
Off Engine Task
1. Inspect oil filter cover assembly (1) as follows:
a. There shall be no cracks.
b. There shall be no nicks, dents or scratches deeper than0.015 inch.
c. There shall be no nicks, dents or scratches deeper than0.010 inch on packing grooves (3 and 4).
2. Inspect oil filter element (2) as follows:
a. There shall be no damage.
b. There shall be no contamination. If contamination is found, inspect contaminated oil system (Ref. Task 1-80).
FOLLOW-ON MAINTENANCE:
None
END OF TASK
8-86
