TM 1-2840-252-23-3
8-30
INSPECT OIL FILLER ASSEMBLY AND OIL FILLER STRAINER
8-30
INITIAL SETUP
Materials:
Applicable Configurations:
None
All
Personnel Required:
Tools:
Technical Inspection Tool Kit,
Equipment Condition:
Off Engine Task
1. Inspect pan mounting surface (1). There shall be no cracks.
2. Inspect packing sealing surface (2). There shall be no nicks, dents and scratches greater than 0.015 inch.
Inspect cap assembly (3). Spring (4) shall not be broken. There shall be no nicks, dents or scratches deeper than 0.015
inch in packing groove (5). Locking tabs (6) shall not be bent or distorted.
GO TO NEXT PAGE
8-75